Thermal decomposition of butylindium thiolates and preparation of indium sulfide powders

Thermal properties of organoindium thiolates were investigated by means of thermogravimetric (TG) and differential thermal (DT) analysis. Dibutyl-indium propylthiolates (Buⁿ₂InSPrⁿ, Buⁿ₂InSPrⁱ, Buⁱ₂InSPrⁿ and Buⁱ₂InSPrⁱ) decomposed up to 280°C along with an exothermic DT peak and gave indium(I) sulfide (InS) powders. Although the arylthiolate Buⁿ₂InSPh also afforded InS powders, it decomposed at a slightly higher temperature. In contrast, the dithiolate and the dithiocarbamate complexes [BuⁿIn(SPrⁱ)₂ and In (S₂CNBu₂)₃] gave indium(III) sulfide (In₂S₃) powders.     

纳米SiC蓝光发射的研究

在４．６８ｅＶ的激光激发下，室温ＣＶＤ合成的纳米ＳｉＣ粉体，可发射４７５ｎｍ的蓝光，经６００～１１００℃在Ｎ２气氛下进行快速退火（ＲＴＡ）处理，其荧光强度随退火温度升高而增强，当Ｔ≥９００℃时，荧光强度下降，但发光峰位与退火温度无关．通过ＸＲＤ、ＩＲ、ＴＥＭ、ＸＰＳ等研究，认为纳米ＳｉＣ中与氧有关的缺陷可能是引起４７５ｎｍ蓝光发射的主要原因     

Bi-2223喷雾热分解粉末热处理工艺优化

Bi-2223 带材目前在电流引线、 超导电机、 超导电缆、 超导限流器等领域实现了许多示范性应用, 载流性能是表征其性能的重要指标, 而高质量的前驱体粉末是最终带材性能的关键保障. 本文选用具有工艺简单、 粉末效率高、 批次稳定性好等优点的喷雾热分解法制备的Bi-2223 前驱体粉末, 利用 TG-DSC、XRD、SEM 等测试手段对低氧条件下不同保温时间烧结的粉末进行分析, 并结合最终带材的载流性能测试结果, 获得了最优粉末烧结参数, 为后续喷雾热分解粉末的进一步生成 Bi-2223 相以及高性能粉末的制备提供了依据.     

Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis

This article examines the substrate/coating interface of a coating deposited onto mild steel and stainless steel substrates using an ambient temperature blast coating technique known as CoBlast. The process uses a coincident stream of an abrasive blast medium and coating medium particles to modify the substrate surface. The hypothesis for the high bond strength is that the abrasive medium roughens the surface while simultaneously disrupting the passivating oxide layer of the substrate, thereby exposing the reactive metal that then reacts with the coating medium. The aim of this study is to provide greater insight into the coating/substrate bonding mechanism by analysing the interface between a hydroxyapatite coating on both mild and stainless steel substrates. The coating adhesion was measured via a tensile test, and bond strengths of approximately 45 MPa were measured. The substrate/coating interface was examined using transmission electron microscopy and selected area diffraction. The analysis of the substrate/coating interface revealed the presence of ultrafine grains in both the coating and substrate at interface associated with deformation at the interface caused by particle impaction during deposition. The chemical reactivity resulting from the creation of these ultrafine grains is proposed to explain the high adhesive strength of CoBlast coatings.     

催化反应制备碳化硅纳米粉体的密度泛函理论计算及实验研究

以Si_(55),Si_(43)M_(12)和Si_(37)M_(18)(M=Fe,Co或Ni)团簇为模型,采用密度泛函理论(DFT)研究了Fe,Co及Ni纳米团簇催化硅粉转化为SiC的机理.计算结果表明,Fe,Co及Ni纳米催化剂先与Si形成合金,拉长并弱化Si—Si键的强度,起到活化Si粉的作用;合金的形成有利于C原子的吸附及Si原子和C原子间的反应;Fe的催化能力强于Co和Ni.在此基础上,以Si粉和酚醛树脂为原料,以Fe,Co及Ni硝酸盐为催化剂前驱体,通过微波加热反应制备了3C-SiC纳米粉体.研究了催化剂种类、反应温度、催化剂用量和反应时间等对制备3C-SiC纳米粉体的影响.结果表明,催化剂Fe,Co和Ni的加入均可显著降低3C-SiC的合成温度.当以2.0%(质量分数)的Fe为催化剂时,Si粉在1100℃下反应30 min后即可全部转化为3C-SiC纳米粉体;而在相同条件下,无催化剂时Si粉的完全转化温度为1250℃;Fe的催化效果优于Co和Ni,与DFT计算结果吻合.     

Al_2O_3包覆Ba_(0.6)Sr_(0.4)TiO_3复合粉体制备及表征

采用液相包覆法制备了Al2O3包覆的Ba0.6Sr0.4TiO3复合粉体。通过SEM,TEM,TG-DSC,XRD,XPS和ζ电位测试对包覆前后粉体的表面形貌、组织结构、等电点进行了测试和分析。结果表明:Al2O3以无定形结构成功的包覆在Ba0.6Sr0.4TiO3粉体表面,形成了Ba-O-Al、Sr-O-Al和Ti-O-Al键,Ba0.6Sr0.4TiO3颗粒的等电点由包覆前的pH=3.2增大至pH=8。     

A label-free differential proteomic analysis of mouse bronchoalveolar lavage fluid exposed to ultrafine carbon black

Ultrafine carbon black (ufCB) is a potential hazard to the lung. It causes changes in protein expression and it increases alveolar-capillary permeability in the lung. Label-free quantitative proteomic methods allow a sensitive and accurate analytical method for identifying and quantifying proteins in a protein mixture without chemically modifying the proteins. We used a label-free quantitative proteomic approach that combined and aligned LC-MS and LC-MS/MS spectra to analyze mouse bronchoalveolar lavage fluid (BALF) protein changes associated with exposure to ufCB. We developed a simple normalization method for quantification without spiking the internal standard. The intensities of unchanged peptides were used as normalization factors based on a statistical method to avoid the influence of peptides changed because of ufCB. LC-MS/MS spectra and then database searching were used to identify proteins. The relative abundances of the aligned peptides of identified proteins were determined using LC-MS spectra. We identified 132 proteins, of which 77 are reported for the first time. In addition, the expression of 15 inflammatory proteins and surfactant-associated proteins was regulated (i.e., 7 upregulated and 8 downregulated) compared with the controls. Several proteins not previously reported provide complementary information on the proteins present in mouse BALF, and they are potential biomarkers for the understanding of mechanisms involved in ufCB-induced lung disorders hypothesize that using the label-free quantitative proteomic approach introduced here is well suited for more rigorous, large-scale quantitative analysis of biological samples. We hypothesize that this label-free quantitative proteomic approach will be suited for a large-scale quantitative analysis of biological samples.     

激光剥蚀-电感耦合等离子体质谱测定植物样品中的元素

采用193 nm准分子激光剥蚀-电感耦合等离子体质谱(LA-ICP-MS)对标准植物粉末样品(GBW07602-GBW07603灌木枝叶、GBW07604杨树叶、GBW07605茶叶、GBW08514烟草)中13种元素(Li,B,Na,Mg,Al,K,Ca,Cr,Mn,Fe,Ni,Cu,Ba)进行定量测试.向植物粉末样...     

XPS analysis of bio‐organic systems

A survey of the literature is made for the XPS analysis of food products (mainly spray‐dried powders, which reveal a considerable surface enrichment in lipids) and of microorganisms and related systems (extracellular polymer substances and biofilms). This survey is used as a background for discussions and recommendations regarding methodology. Sample preparation methods reviewed are freeze drying, analysis of frozen hydrated specimens and adsorption of surface‐active biocompounds on model substrates. Peak decomposition is a way to increase the wealth of information provided by the XPS spectra. It should be performed after a check that sample charge stabilization is satisfactory. Moreover, ensuring the precision needed to make comparisons within sets of samples may involve a trade‐off between imposing constraints and generating information. The examination of correlations between spectral data in the light of chemical guidelines is useful to validate or improve peak decomposition and component assignment, and may also upgrade the chemical information regarding speciation. Further upgrading may be achieved by expressing marker XPS data in terms of concentrations of compounds of interest. Different methods of computation are discussed, providing a composition in terms of ingredients, classes of biochemical compounds, or various organic and inorganic compounds. As an alternative or complement to this deterministic approach, multivariate analysis of suitable spectral windows provides spectral components, which may be used for comparing samples, and which may have a direct chemical relevance or be used to identify features of interest. Copyright © 2011 John Wiley & Sons, Ltd.     

超细碳酸钙的制备与表征

本文探讨了乳液法制备油溶性超细碳酸钙的最佳实验条件，并对获得的超细碳酸钙进行了表征.实验结果表明:超细碳酸钙形状呈球形，粒度均匀，粒径分布在。. O1 ^-0. 03}m之间，在许多有机溶剂中具有良好的分散性.